第72章 钢铁
共 167 个 8 位税号。点进税号看详细要求和成本计算。
| 税号 | 商品描述 | 最惠国税率 | 部门监管 | 附加税 | 反倾销 |
|---|---|---|---|---|---|
| 7201.10.00 | 非合金生铁，按重量计含磷量在0.5％及以下 Non-alloy pig iron containing by weight 0.5% or less of phosphorus | 免税 | |||
| 7201.20.00 | 非合金生铁，按重量计含磷量在0.5％以上 Non-alloy pig iron containing by weight more than 0.5% of phosphorus | 免税 | |||
| 7201.50.00 | 合金生铁；镜铁 Alloy pig iron; spiegeleisen | 免税 | |||
| 7202.11.00 | 按重量计含碳量在2％以上 Containing by weight more than 2% of carbon | 免税 | |||
| 7202.19.00 | 其他 Other | 免税 | |||
| 7202.21.00 | 按重量计含硅量55％以上 Containing by weight more than 55% of silicon | 免税 | |||
| 7202.29.00 | 其他 Other | 免税 | |||
| 7202.30.00 | 硅锰铁 Ferro-silico-manganese | 免税 | |||
| 7202.41.00 | 按重量计含碳量在4％以上 注：原产于适用普通税率国家的本税号货品，也可享受最惠国 Containing by weight more than 4% of carbon Note: The benefit of the Most-Favoured-Nat | 免税 | |||
| 7202.49.00 | 其他 注：原产于适用普通税率国家的本税号货品，也可享受最惠国税率。 Other Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of t | 免税 | |||
| 7202.50.00 | 硅铬铁 Ferro-silico-chromium | 免税 | |||
| 7202.60.00 | 镍铁 Ferro-nickel | 免税 | |||
| 7202.70.00 | 钼铁 Ferro-molybdenum | 免税 | |||
| 7202.80.00 | 钨铁及硅钨铁 Ferro-tungsten and ferro-silico-tungsten | 免税 | |||
| 7202.91.00 | 钛铁及硅钛铁 Ferro-titanium and ferro-silico-titanium | 免税 | |||
| 7202.92.00 | 钒铁 Ferro-vanadium | 免税 | |||
| 7202.93.00 | 铌铁 Ferro-niobium | 免税 | |||
| 7202.99.00 | 其他 Other | 免税 | |||
| 7203.10.00 | 直接从铁矿还原所得的铁产品 Ferrous products obtained by direct reduction of iron ore | 免税 | |||
| 7203.90.00 | 其他 Other | 免税 | |||
| 7204.10.00 | 铸铁废碎料 Waste and scrap of cast iron | 免税 | |||
| 7204.21.00 | 不锈钢废碎料 Of stainless steel | 免税 | |||
| 7204.29.00 | 其他 Other | 免税 | |||
| 7204.30.00 | 镀锡钢铁废碎料 Waste and scrap of tinned iron or steel | 免税 | |||
| 7204.41.00 | 车、刨、铣、磨、锯、锉、剪、冲加工过程中产生的废料，不论是否成捆 Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, wheth | 免税 | |||
| 7204.49.00 | 其他 Other | 免税 | |||
| 7204.50.00 | 供再熔的碎料钢铁锭 Remelting scrap ingots | 免税 | |||
| 7205.10.00 | 颗粒 Granules | 免税 | |||
| 7205.21.00 | 合金钢的 Of alloy steel | 免税 | |||
| 7205.29.00 | 其他 Other | 免税 | |||
| 7206.10.00 | 锭状 Ingots | 免税 | 1 | 有 | |
| 7206.90.00 | 其他 Other | 免税 | 1 | 有 | |
| 7207.11.00 | 矩形（包括正方形）截面，宽度小于厚度的两倍 Of rectangular (including square) cross-section, the width measuring less than twice the t | 免税 | 1 | 有 | |
| 7207.12.00 | 其他矩形（正方形除外）截面的 Other, of rectangular (other than square) cross-section | 免税 | 1 | 有 | |
| 7207.19.00 | 其他 Other | 免税 | 1 | 有 | |
| 7207.20.00 | 按重量计含碳量在0.25%及以上 Containing by weight 0.25% or more of carbon | 免税 | 1 | 有 | |
| 7208.10.00 | 除热轧外未经进一步加工的卷材，已轧压花纹 In coils, not further worked than hot-rolled, with patterns in relief | 免税 | 1 | 有 | |
| 7208.25.00 | 厚度在4.75毫米及以上 Of a thickness of 4.75 mm or more | 免税 | 1 | 有 | 有 |
| 7208.26.00 | 厚度在3毫米及以上，但小于4.75毫米 Of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | 有 |
| 7208.27.00 | 厚度小于3毫米 Of a thickness of less than 3 mm | 免税 | 1 | 有 | 有 |
| 7208.36.00 | 厚度超过10毫米 Of a thickness exceeding 10 mm | 免税 | 1 | 有 | 有 |
| 7208.37.00 | 厚度在4.75毫米及以上，但不超过10毫米 Of a thickness of 4.75 mm or more but not exceeding 10 mm | 免税 | 1 | 有 | 有 |
| 7208.38.00 | 厚度在3毫米及以上，但小于4.75毫米 Of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | 有 |
| 7208.39.00 | 厚度小于3毫米 Of a thickness of less than 3 mm | 免税 | 1 | 有 | 有 |
| 7208.40.00 | 已轧压花纹的非卷材，除热轧外未经进一步加工 Not in coils, not further worked than hot-rolled, with patterns in relief | 免税 | 1 | 有 | |
| 7208.51.00 | 厚度超过10毫米 Of a thickness exceeding 10 mm | 免税 | 1 | 有 | 有 |
| 7208.52.00 | 厚度在4.75毫米及以上，但不超过10毫米 Of a thickness of 4.75 mm or more but not exceeding 10 mm | 免税 | 1 | 有 | 有 |
| 7208.53.00 | 厚度在3毫米及以上，但小于4.75毫米 Other, of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | 有 |
| 7208.54.00 | 厚度小于3毫米 Other, of a thickness of less than 3 mm | 免税 | 1 | 有 | 有 |
| 7208.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7209.15.00 | 厚度在3毫米及以上 Of a thickness of 3 mm or more | 免税 | 1 | 有 | 有 |
| 7209.16.00 | 厚度超过1毫米，但小于3毫米 Of a thickness exceeding 1 mm but less than 3 mm | 免税 | 1 | 有 | 有 |
| 7209.17.00 | 厚度在0.5毫米及以上，但不超过1毫米 Of a thickness of 0.5 mm or more but not exceeding 1 mm | 免税 | 1 | 有 | 有 |
| 7209.18.00 | 厚度小于0.5毫米 Of a thickness of less than 0.5 mm | 免税 | 1 | 有 | 有 |
| 7209.25.00 | 厚度在3毫米及以上 Of a thickness of 3 mm or more | 免税 | 1 | 有 | 有 |
| 7209.26.00 | 厚度超过1毫米，但小于3毫米 Of a thickness exceeding 1 mm but less than 3 mm | 免税 | 1 | 有 | 有 |
| 7209.27.00 | 厚度在0.5毫米及以上，但不超过1毫米 Of a thickness of 0.5 mm or more but not exceeding 1 mm | 免税 | 1 | 有 | 有 |
| 7209.28.00 | 厚度小于0.5毫米 Of a thickness of less than 0.5 mm | 免税 | 1 | 有 | 有 |
| 7209.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7210.11.00 | 厚度在0.5毫米及以上 Of a thickness of 0.5 mm or more | 免税 | 1 | 有 | |
| 7210.12.00 | 厚度小于0.5毫米 Of a thickness of less than 0.5 mm | 免税 | 1 | 有 | |
| 7210.20.00 | 镀或涂铅的，包括镀铅锡钢板 Plated or coated with lead, including terne-plate | 免税 | 1 | 有 | |
| 7210.30.00 | 电镀或涂锌的 Electrolytically plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7210.41.00 | 瓦楞形 Corrugated | 免税 | 1 | 有 | |
| 7210.49.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7210.50.00 | 镀或涂氧化铬或铬及氧化铬的 Plated or coated with chromium oxides or with chromium and chromium oxides | 免税 | 1 | 有 | |
| 7210.61.00 | 镀或涂铝锌合金的 Plated or coated with aluminum-zinc alloys | 免税 | 1 | 有 | 有 |
| 7210.69.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7210.70.00 | 涂漆或涂塑的 Painted, varnished or coated with plastics | 免税 | 1 | 有 | |
| 7210.90.00 | 其他 Other | 免税 | 1 | 有 | |
| 7211.13.00 | 经四面轧制或在闭合匣内轧制的非卷材，宽度超过150毫米，厚度不小于4毫米，未轧压 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness | 免税 | 1 | 有 | 有 |
| 7211.14.00 | 其他，厚度在4.75毫米及以上 Other, of a thickness of 4.75 mm or more | 免税 | 1 | 有 | 有 |
| 7211.19.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7211.23.00 | 按重量计含碳量低于0.25％ Containing by weight less than 0.25% of carbon | 免税 | 1 | 有 | 有 |
| 7211.29.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7211.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7212.10.00 | 镀或涂锡的 Plated or coated with tin | 免税 | 1 | 有 | |
| 7212.20.00 | 电镀或涂锌的 Electrolytically plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7212.30.00 | 用其他方法镀或涂锌的 Otherwise plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7212.40.00 | 涂漆或涂塑的 Painted, varnished or coated with plastics | 免税 | 1 | 有 | 有 |
| 7212.50.00 | 镀或涂其他材料的 Otherwise plated or coated | 免税 | 1 | 有 | 有 |
| 7212.60.00 | 经包覆的 Clad | 免税 | 1 | 有 | 有 |
| 7213.10.00 | 带有轧制过程中产生的凹痕、凸缘、槽沟及其他变形的 Containing indentations, ribs, grooves or other deformations produced during the rolling p | 免税 | 1 | 有 | 有 |
| 7213.20.00 | 其他，易切削钢制 Other, of free-cutting steel | 免税 | 1 | 有 | |
| 7213.91.00 | 直径小于14毫米圆形截面的 Of circular cross-section measuring less than 14 mm in diameter | 免税 | 1 | 有 | 有 |
| 7213.99.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7214.10.00 | 锻造的 Forged | 免税 | 1 | ||
| 7214.20.00 | 带有轧制过程中产生的凹痕、凸缘、槽沟或其他变形以及轧制后扭曲的 Containing indentations, ribs, grooves or other deformations produced during the rolling p | 免税 | 1 | 有 | 有 |
| 7214.30.00 | 其他，易切削钢制 Other, of free-cutting steel | 免税 | 1 | 有 | |
| 7214.91.00 | 矩形（正方形除外）截面的 Of rectangular (other than square) cross-section | 免税 | 1 | 有 | |
| 7214.99.00 | 其他 Other | 免税 | 1 | 有 | |
| 7215.10.00 | 易切削钢制，除冷成型或冷加工外未经进一步加工 Of free-cutting steel, not further worked than cold-formed or cold-finished | 免税 | 1 | 有 | |
| 7215.50.00 | 其他，除冷成型或冷加工外未经进一步加工 Other, not further worked than cold-formed or cold-finished | 免税 | 1 | 有 | |
| 7215.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7216.10.00 | 槽钢、工字钢及H型钢，除热轧、热拉拔或热挤压外未经进一步加工，截面高度低于80毫 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height | 免税 | 1 | 有 | |
| 7216.21.00 | 角钢 L sections | 免税 | 1 | 有 | |
| 7216.22.00 | 丁字钢 T sections | 免税 | 1 | 有 | |
| 7216.31.00 | 槽钢 U sections | 免税 | 1 | 有 | |
| 7216.32.00 | 工字钢 I sections | 免税 | 1 | 有 | |
| 7216.33.00 | H型钢 H sections | 免税 | 1 | 有 | |
| 7216.40.00 | 角钢及丁字钢，除热轧、热拉拔或热挤压外未经进一步加工，截面高度在80毫米及以上 L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of | 免税 | 1 | 有 | |
| 7216.50.00 | 其他角材、型材及异型材，除热轧、热拉拔或热挤压外未经进一步加工 Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extrud | 免税 | 1 | 有 | |
| 7216.61.00 | 平板轧材制的 Obtained from flat-rolled products | 免税 | 1 | ||
| 7216.69.00 | 其他 Other | 免税 | 1 | ||
| 7216.91.00 | 平板轧材经冷成型或冷加工制的 Cold-formed or cold-finished from flat-rolled products | 免税 | 1 | 有 | |
| 7216.99.00 | 其他 Other | 免税 | 1 | 有 | |
| 7217.10.00 | 未经镀或涂层，不论是否抛光 Not plated or coated, whether or not polished | 免税 | 1 | 有 | 有 |
| 7217.20.00 | 镀或涂锌的 Plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7217.30.00 | 镀或涂其他贱金属的 Plated or coated with other base metals | 免税 | 1 | 有 | 有 |
| 7217.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7218.10.00 | 锭状及其他初级形状 Ingots and other primary forms | 免税 | 1 | 有 | |
| 7218.91.00 | 矩形（正方形除外）截面的 Of rectangular (other than square) cross-section | 免税 | 1 | 有 | |
| 7218.99.00 | 其他 Other | 免税 | 1 | 有 | |
| 7219.11.00 | 厚度超过10毫米 Of a thickness exceeding 10 mm | 免税 | 1 | 有 | |
| 7219.12.00 | 厚度在4.75毫米及以上，但不超过10毫米 Of a thickness of 4.75 mm or more but not exceeding 10 mm | 免税 | 1 | 有 | |
| 7219.13.00 | 厚度在3毫米及以上，但小于4.75毫米 Of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | |
| 7219.14.00 | 厚度小于3毫米 Of a thickness of less than 3 mm | 免税 | 1 | 有 | |
| 7219.21.00 | 厚度超过10毫米 Of a thickness exceeding 10 mm | 免税 | 1 | 有 | |
| 7219.22.00 | 厚度在4.75毫米及以上，但不超过10毫米 Of a thickness of 4.75 mm or more but not exceeding 10 mm | 免税 | 1 | 有 | |
| 7219.23.00 | 厚度在3毫米及以上，但小于4.75毫米 Of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | |
| 7219.24.00 | 厚度小于3毫米 Of a thickness of less than 3 mm | 免税 | 1 | 有 | |
| 7219.31.00 | 厚度在4.75毫米及以上 Of a thickness of 4.75 mm or more | 免税 | 1 | 有 | |
| 7219.32.00 | 厚度在3毫米及以上，但小于4.75毫米 Of a thickness of 3 mm or more but less than 4.75 mm | 免税 | 1 | 有 | |
| 7219.33.00 | 厚度超过1毫米，但小于3毫米 Of a thickness exceeding 1 mm but less than 3 mm | 免税 | 1 | 有 | |
| 7219.34.00 | 厚度在0.5毫米及以上，但不超过1毫米 Of a thickness of 0.5 mm or more but not exceeding 1 mm | 免税 | 1 | 有 | |
| 7219.35.00 | 厚度小于0.5毫米 Of a thickness of less than 0.5 mm | 免税 | 1 | 有 | |
| 7219.90.00 | 其他 Other | 免税 | 1 | 有 | |
| 7220.11.00 | 厚度在4.75毫米及以上 Of a thickness of 4.75 mm or more | 免税 | 1 | ||
| 7220.12.00 | 厚度小于4.75毫米 Of a thickness of less than 4.75 mm | 免税 | 1 | 有 | |
| 7220.20.00 | 除冷轧外未经进一步加工 Not further worked than cold-rolled (cold-reduced) | 免税 | 1 | 有 | |
| 7220.90.00 | 其他 Other | 免税 | 1 | 有 | |
| 7221.00.00 | 不规则盘卷的不锈钢热轧条、杆 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. | 免税 | 1 | 有 | |
| 7222.11.00 | 圆形截面的 Of circular cross-section | 免税 | 1 | 有 | |
| 7222.19.00 | 其他 Other | 免税 | 1 | 有 | |
| 7222.20.00 | 条、杆，除冷成形或冷加工外未经进一步加工 Bars and rods, not further worked than cold-formed or cold-finished | 免税 | 1 | 有 | |
| 7222.30.00 | 其他条、杆 Other bars and rods | 免税 | 1 | 有 | |
| 7222.40.00 | 角材、型材及异型材 Angles, shapes and sections | 免税 | 1 | 有 | |
| 7223.00.00 | 不锈钢丝 Wire of stainless steel. | 免税 | 1 | 有 | |
| 7224.10.00 | 锭状及其他初级形状 Ingots and other primary forms | 免税 | 1 | 有 | |
| 7224.90.00 | 其他 Other | 免税 | 1 | 有 | |
| 7225.11.00 | 取向性硅电钢 Grain-oriented | 免税 | 1 | 有 | |
| 7225.19.00 | 其他 Other | 免税 | 1 | 有 | |
| 7225.30.00 | 其他卷材，除热轧外未经进一步加工 Other, not further worked than hot-rolled, in coils | 免税 | 1 | 有 | 有 |
| 7225.40.00 | 其他非卷材，除热轧外未经进一步加工 Other, not further worked than hot-rolled, not in coils | 免税 | 1 | 有 | 有 |
| 7225.50.00 | 其他，除冷轧外未经进一步加工 Other, not further worked than cold-rolled (cold-reduced) | 免税 | 1 | 有 | 有 |
| 7225.91.00 | 电镀或涂锌的 Electrolytically plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7225.92.00 | 用其他方法镀或涂锌的 Otherwise plated or coated with zinc | 免税 | 1 | 有 | 有 |
| 7225.99.00 | 其他 Other | 免税 | 1 | 有 | |
| 7226.11.00 | 取向性硅电钢 Grain-oriented | 免税 | 1 | 有 | |
| 7226.19.00 | 其他 Other | 免税 | 1 | 有 | |
| 7226.20.00 | 高速钢制 Of high speed steel | 免税 | 1 | 有 | 有 |
| 7226.91.00 | 除热轧外未经进一步加工 Not further worked than hot-rolled | 免税 | 1 | 有 | 有 |
| 7226.92.00 | 除冷轧外未经进一步加工 Not further worked than cold-rolled (cold-reduced) | 免税 | 1 | 有 | |
| 7226.99.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7227.10.00 | 高速钢制 Of high speed steel | 免税 | 1 | 有 | |
| 7227.20.00 | 硅锰钢制 Of silico-manganese steel | 免税 | 1 | 有 | 有 |
| 7227.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |
| 7228.10.00 | 高速钢条、杆 Bars and rods, of high speed steel | 免税 | 1 | ||
| 7228.20.00 | 硅锰钢条、杆 Bars and rods, of silico-manganese steel | 免税 | 1 | 有 | |
| 7228.30.00 | 其他条、杆，除热轧、热拉拔或热挤压外未经进一步加工 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | 免税 | 1 | 有 | 有 |
| 7228.40.00 | 其他条、杆，除锻造外未经进一步加工 Other bars and rods, not further worked than forged | 免税 | 1 | 有 | |
| 7228.50.00 | 其他条、杆，除冷成形或冷加工外未经进一步加工 Other bars and rods, not further worked than cold-formed or cold-finished | 免税 | 1 | 有 | |
| 7228.60.00 | 其他条、杆 Other bars and rods | 免税 | 1 | 有 | |
| 7228.70.00 | 角材、型材及异型材 Angles, shapes and sections | 免税 | 1 | 有 | |
| 7228.80.00 | 空心钻钢 Hollow drill bars and rods | 免税 | 1 | ||
| 7229.20.00 | 硅锰钢制 Of silico-manganese steel | 免税 | 1 | 有 | 有 |
| 7229.90.00 | 其他 Other | 免税 | 1 | 有 | 有 |